405 L4-1905cc 1.9L (1989)
16.
Fuel line retaining clip
17.
13 mm diameter hose clamp for fuel line between pump and filter
18.
58 mm diameter hose clamp between fuel filler tube and tank
19.
60 mm diameter hose clamp between fuel filler tube and hose (red i.d. paint dot on hose clamp screw housing)
21.
"L" shaped bracket for fuel filter
22.
Edge protector to be cut to length
23.
Sealing washer
24.
70 mm length rubber hose
MODIFICATION PROCEDURE:
IMPORTANT WARNING:
THROUGHOUT ALL OPERATION STEPS INDICATED IN THIS PROCEDURE, ANY GRINDING OR WELDING
OPERATIONS ARE STRICTLY FORBIDDEN ON OR NEAR THE VEHICLE BEING MODIFIED.
STEP 1:
-
Remove:
-
spare tire
-
ski boot housing on Sedan models if equipped
-
trunk carpet and insulator pad
-
Place the vehicle on lift
-
Remove:
-
hose clamps on fuel line between fuel pump and filter
-
fuel pump bracket (a) and fuel filter bracket (b) (10 mm retaining nuts)
-
fuel line between fuel pump and filter
STEP 2: