505 L4-2155cc N9te (1986)
8.
Give anti-theft code to PDI technician.
9.
PDI technician programs radio, checks radio & speaker operation.
Possible Problem:
10.
The port installer or convoy driver has touched one of the buttons accidentally. The code entry is out of sequence.
Solution:
Handle as in 1a.
Possible Problem:
11.
The port installer or convoy driver, etc. keeps pressing the code buttons and uses up the first three "tries".
Solution:
Handle as in 1c.
Possible Problem.
12.
Neither solution for steps 10 and 11 work. Check radio serial number on radio against anti-theft code cards. If incorrect, call Peugeot National
Customer Relations Manager for the correct codes.
Possible Problem:
13.
After three tries of entering the 5-digit code, "CODE" still appears in display.
Solution:
"Clear" unit by pressing any button 20 times with ignition in accessory position. Leave ignition and radio on for one hour, then
re-enter code.
FAILSAFE - If radio is defective, replace with new radio from parts inventory.
DEALER RESPONSIBILITY - AT DELIVERY
14.
Explain use of radio and anti-theft code to customer as part of Priority Delivery Program. Encourage customer to use anti-theft hang tag and to
install warning decals on the windows.
CUSTOMER RESPONSIBILITY
15.
Principal driver should keep one anti-theft code card in wallet or purse.
16.
Second code card should be filed with vehicle papers TO INSURE TRANSFER OF CODE CARD TO FUTURE VEHICLE OWNER.
Possible Problem:
17.
Code cards lost. Customer must visit Peugeot Dealer. Proof of vehicle ownership and proper identification (valid driver's license) must be given to
Peugeot dealer personnel. This information must then be given by authorized dealer personnel ONLY to Peugeot Motors of America before radio
"anti-theft codes" will be released (customer calls will not be accepted). This is necessary for the customer's security and protection. Only the
National Customer Relations Manager, Service Engineering Manager and National Service & Technical Manager will have access to computer
program to give out anti-theft codes after proper identification of customer is established. Call 201-935-8400.
