505 L4-2155cc N9te (1986)
BTravel limiting collar CRigidity insert
Fitted from:
0368 831 N9T 0364 118 S.W. 0363 637 Sedan
up to:
0373 161 N9T 0374 604 S.W. 0374 256 Sedan
DFlat travel limiting washer without tab. P.N. 3524.23
Fitted from:
0373 162 N9T 0374 605 S.W. 0374 257 Sedan
This new bushing will be available under P.N. 3561.09 and must only be fitted with flat washer P.N. 3524.23. Currently only II fitting is available under
P.N. 3561.09.
If changing I or II to type III, change both.
Apply a dab of "KLUBER PROBA ALTEMP" lubricant on contact faces of bushing and washer. (P.N. 9730.67).
NOTE:
During the first few miles of operation, the pulsation, shimmy, and noise level may increase noticeably until the abrasive brake pad fine
grinding action on the rotor is completed.
A 10 mile road test, applying the brakes several time is required prior to delivering the vehicle back to the owner.
WARRANTY INFORMATION:For Warranty Claim Preparation and Submission the following Damage Code, Main Operation Number, and Time
Allowance is to be used.
For vehicles that have new bushings and flat washers, see page 2 for VIN range, and require only brake pads, insulators,
and road test.
Damage Code:
424642
Main Operation Number:
082710
Time Allowance:
0075
For vehicles that require bushings, flatwashers, brake pads, and road test.