505 L4-2155cc N9te (1986)
Shift Linkage: Technical Service Bulletins
A/T - 4HP22 Selector Adjustment Procedure
Bulletin No. 164
Date:
November, 1985
Subject:
1986 505 4HP22 AUTOMATIC TRANSMISSION GEARSHIFT SELECTOR ADJUSTMENT PROCEDURE AND
READJUSTMENT PROGRAM
DEALER ACTION:
ALL 1986 CARS WITH A V.I.N. PRIOR TO 0395964 MUST BE CHECKED FOR PROPER OPERATION OF THE GEARSHIFT SELECTOR
DURING P.D.I. AND ADJUSTED IF NECESSARY.
1986 505 models are equipped with a new four speed ZF 4HP22 automatic transmission. The adjustment procedure for gearshift selector is not the same
as the method indicated in our transmission workshop manual for the 3HP22.
Adjustment Procedure
ADJUSTMENT PROCEDURE:
1)
Place gearshift selector in "P" Park position.
2)
Raise vehicle on lift.
3)
With transmission lever in "P" as shown on Page 2 (full rearward detent), loosen shift rod lock nut; remove rod retaining clip and rod bushing
from transmission lever. Adjust rod length so that rod bushing aligns precisely with centerline of transmission lever stud.
