Acclaim L4-153 2.5L SOHC (1990)
Power Door Lock Motor: Service and Repair
Remove the door trim panel(s) to gain access.
Door Lock Motor Location
Door Lock Motor Location
Removal
Move door water shield away from lower rear corner of door. Disconnect the wire plug from the door solenoid. Remove the door solenoid link from the
door latch. Remove the solenoid mounting bracket pop rivets by drilling the rivet heads with a suitable sized drill bit. Remove the door solenoid through
the access opening in the door.
Installation
Insert door solenoid through the door access opening. Align solenoid mounting bracket with inside door panel and install new pop rivets or matching nut,
bolt, and washer sets. Connect the solenoid link to the door latch. Reconnect the wiring plug, and retest system for proper operation. Secure door water
shield in original position and reinstall door trim panel(s).