Acclaim L4-153 2.5L SOHC (1990)
Antilock Brakes / Traction Control Systems: Reading and Clearing Diagnostic Trouble Codes
Displaying & Reading Trouble Codes
The manufacturer doesn't give a procedure for retrieving trouble codes without a scan tool. This ABS system has a self-diagnosis connector located
under the fuse panel access cover. The access cover is located on the lower section of the instrument panel to the left of the steering column. The ABS
diagnostic connector is a blue 6-way connector which can be connected to a DRB II diagnostic readout box.
After connecting the DRB II the the diagnostic connector follow the DRB II manufacturer instructions to further diagnose the ABS system.
1.
All diagnostic test procedures assume a Chrysler Diagnostic Readout Box (DRB II) is being used. Tests have been designed specifically for
the DRB II.
2.
After completion of diagnosis and repair of the system, perform any verification test provided.
Clearing Trouble Codes
The Manufactuer doesn't give a procedure for clearing codes without a scan tool. Fault codes can be cleared by using the DRB II diagnostics tester, or
they will be automatically cleared after 50 ignition switch ON/OFF cycles.
