Acclaim L4-153 2.5L SOHC (1990)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor (TPS) Removal
REMOVAL
1.
Disconnect negative battery cable.
2.
Remove air cleaner.
3.
Disconnect electrical connector.
4.
Remove the two Throttle Position Sensor mounting screws and remove TPS.
INSTALLATION
1.
Install TPS and tighten screws to 2 Nm (20 lb-in).
2.
Connect electrical connector.
3.
Install air cleaner.
4.
Connect negative battery cable.