Acclaim L4-153 2.5L SOHC Turbo (1989)
Figure 1
Figure 2
1.
Remove fuel tube/wiring bracket fasteners. (See Figure 1 for passenger car--Figure 2 for AN truck).
2.
Remove timing belt cover.
NOTE:
RETAIN TUBE BRACKET AND TIMING COVER STUD NUTS FOR REASSEMBLY.
3.
Remove existing cylinder head cover, discard cover, gasket and fasteners.
4.
Clean cylinder head-to-cover gasket surface.
Figure 3
5.
Apply RTV sealant to cylinder head cover rail (Figure 3).
6.
Attach cylinder head cover and seals (P/N 5214479) to cylinder head cover.
7.
Install the cylinder head cover on the cylinder head, using the 4 studs/washers (P/N 6500435) at each corner of the cylinder head and install the 5
screws/washers (P/N 6100276) in the remaining holes.