Acclaim L4-153 2.5L SOHC Turbo (1989)
Throttle Valve Cable/Linkage: Adjustments
1. Perform adjustment with engine at operating temperature, otherwise ensure carburetor is not on fast idle cam by disconnecting choke, if equipped.
2. Loosen cable mounting bracket lock screw.
3. Position mounting bracket with both alignment tabs touching transaxle cast surface.
4. Release cross-lock on cable assembly by pulling the cross-lock upward. To ensure proper adjustment, the cable must be free to slide all the
way toward engine, against its stop, after the cross-lock is released.
5. Move transaxle throttle control lever fully clockwise against its internal stop, and press cross-lock downward into locked position.
6. On all models, reconnect choke, if disconnected, then check cable for freedom of movement by moving throttle control lever.