Acclaim L4-153 2.5L SOHC VIN K TBI (1992)
Window Track: Service and Repair
Front Door Lower Channels
REMOVAL
1. Remove door glass channel and run weatherstrip as necessary to gain access to lower channels and attaching rivets.
2. Drift punch rivet center expansion pins from each pop-rivet fastener holding channel to door panel or minor support frame.
3. Drill pop-rivet fasteners out of door panel or mirror support frame and separate front or rear channel from door.
INSTALLATION
1. Install lower channel into at design location.
2. Install pop-rivets using a suitable pop-rivet gun.
3. Install glass channel and run weatherstrip.
4. Install belt moulding and weatherstrip assembly.
5. Install door glass.
6. Install window opening lower corner seals.
7. Install door water shield silencer pad and trim panel.
