Breeze L4-2.0L VIN C (1997)
Camshaft Oil Seal: Service and Repair
REMOVAL
CAUTION: Do Not Rotate the camshaft or crankshaft when timing belt is removed damage to the engine may occur.
1. Remove front timing belt cover, timing belt and tensioner assembly.
Modification To Special Tool
2. Remove camshaft sprocket bolt, with the Modified Special Tool C-4687-1.
3. Hold camshaft sprocket with modified tool while removing bolt. Remove sprocket from camshaft.
4. Remove rear timing belt cover.
Removing Camshaft Oil Seal
5. Remove camshaft seal using Special Tool C-4679-A.
CAUTION: Do not nick shaft seal surface or seal bore.
6. Shaft seal lip surface must be free of varnish, dirt or nicks. Polish with 400 grit paper if necessary.
INSTALLATION