Caravelle L4-156 2.6L SOHC (1985)
FIGURE 2-D - INSTRUMENT PANEL WIRING
4.
Insert two bare terminals on instrument panel overlay harness, PN 4331801, into the instrument panel side of the bulkhead connector as
shown in Figure 2-D and outlined below.
a.
Yellow wire into cavity #9.
b.
All vehicles except those equipped with tachometer in electronic instrument cluster. Gray with black tracer wire into cavity #34.
c.
Vehicles equipped with a tachometer in electronic instrument cluster. Gray with black tracer wire into cavity #33.
FIGURE 2-A - INSTRUMENT PANEL WIRING
5.
Connect the natural colored one-way connector (on overlay harness, PN 4331801) to the loose natural colored one-way connector that was
installed on the wire removed from cavity #9 of the instrument panel side of the bulkhead connectors in Step 3 (Figure 2-A).
6.
Route instrument panel overlay harness, PN 4331801, along the main instrument panel wiring harness and secure witb three tie wraps, PN
6015756, as shown in Figure 2-A.