plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Carburetor Overhaul|Page 1751 > < Carburetor Overhaul|Page 1749
Page 3
background image

25.

Install new O-ring over fuel cut-off  solenoid, then position solenoid on main body. Tighten mounting screws, connect ground wire and tighten
screw.

26.

Install throttle opener on air horn, then connect link to carburetor and install  E-clip.

27.

Replace drilled out tamper-proof choke cover screws, then align  punch and scribe marks and ensure that cam lever is properly aligned.

28.

Install choke cover and peen over tamper-proof screws, then tighten top screw using small hammer and pointed punch.

29.

Install choke water hose and clamps.

Carburetor Overhaul|Page 1751 > < Carburetor Overhaul|Page 1749