Caravelle L4-156 2.6L SOHC (1985)
Fig. 18 Removing 3 ball tripod housing. Citroen inner C/V joint
2. On CITROEN units, separate tripod from housing by slightly deforming retaining ring at three locations. If necessary, cut retaining ring from
housing and install replacement retaining ring with inner flange rolled, then stake into machined groove with a suitable punch. When removing
tripod from housing, secure rollers. After tripod has been removed, secure assembly with tape.
Fig. 19 Removing 3 ball tripod housing. 1982 & early 1982 G.K.N. inner C/V joint
Fig. 20 Removing 3 ball tripod housing. Late 1982---87 G.K.N. inner C/V joint
3. On early 1982 G.K.N. non-spring loaded units, slide tripod from housing. On late 1982---87 G.K.N. spring loaded units, bend tabs on joint cover
using needle nose pliers, then remove tripod from housing.
Fig. 21 Removing 3 ball tripod housing. 1984 A.C.I. inner C/V joint
Fig. 22 Removing 3 ball tripod housing. 1985---87 A.C.I. inner C/V joint