Caravelle L4-156 2.6L SOHC (1985)
Test Lamp Between Terminal "H" And Ground
1.
If motor will not run on "High" speed, put switch in "High" position and connect test lamp between motor terminal "H" and ground.
Test Lamp Between Terminal "L" And Ground
2.
If motor will not run on "Low" speed, put switch in "Low" position and connect test lamp between motor terminal "L" and ground.
3.
If test lamp does not light at motor terminal, there is an open in wiring or switch. If test lamp lights at motor terminal, replace motor assembly.
Motor Runs Slowly on Any Speed Setting