Colt L4-1597cc 1.6L DOHC (1990)
Steering Gear: Adjustments
1. With rack placed in center position, attach rack support cover to gear housing, then torque cover to specifications using torque wrench socket
MB990607-A or equivalent. Back off cover approximately 30-60°, then install and torque locking nut to specifications.
2. In neutral position, rotate pinion shaft clockwise at a rate of one revolution every 4 to 6 seconds using preload socket CT-1108 and a suitable
torque wrench. Return rack support cover 30-60° and adjust torque to specifications. Total pinion preload should be 5-11 inch lbs. Measure
starting torque through whole stroke of rack.
3. If measured values are not within specifications, readjust rack support cover, then recheck.
4. If still not within specifications, check rack support cover, rack support spring and rack support and replace parts as necessary.
