plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Rear Shelf Panel - Rattle|Page 2884 > < Body Moulding - Replacement|Page 2874
Page 1
background image

Rear Shelf: All Technical Service Bulletins
Rear Shelf Panel - Rattle

Models

1985-1986 Colt Hatchback

Subject

Rear Shelf Panel Rattle

Index

BODY

Date

October 20, 1986

No.

23-10-86

P-3777
SYMPTOM/CONDITION

Rear shelf panel may rattle while driving.

PARTS REQUIRED

2

Shelf Damper

PN MB477207

REPAIR PROCEDURE

The following repair consists of drilling a hole at each end of the shelf panel and installing a shelf damper through the hole. These dampers will be
installed on 1987 Colts.

1.

Remove rear shelf panel.

FIGURE 1

2.

Measure and mark panel at locations as shown in Figure 1. From bottom side of panel, use damper as a template to mark hole location by sliding
damper over edge of panel at 550 mm (21-5/8") from center mark.

3.

Drill a 5.5 mm (.220 or 7/32") hole at each mark.

4.

Install shelf damper, PN MB477207, through each hole and clip together (Figure 1, View A-A).

Rear Shelf Panel - Rattle|Page 2884 > < Body Moulding - Replacement|Page 2874