Colt Vista 2WD L4-2350cc 2.4L SOHC (1993)
Using Feeler Gauge To Position Throttle Sensor
2. Insert a .0256 in. (0.656 mm) feeler gauge between the SAS screw and throttle lever
Measuring Tps Voltage
3. Using a high-impedance digital voltmeter, carefully back probe the throttle position connector into terminals #1 (sensor ground) and #3. (sensor
output) Refer to the connector in the image.
4. Turn the key to the ON position.
5. Check the output voltage.
Voltage
0.40 - 1.00 volts
6. If the voltage is not as specified, check the sensor and harness.
6. Remove feeler gauge.