plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Cooling System > < Valve Clearance|Specifications|Page 1890
Page 1
background image

Water Pump: Service and Repair

Fig. 52  Water Pump Replacement

Fig. 54  Water Pump Bolt Locations

TIP:  In order to make it easy to remove the water pump pulley, loosen the pulley mounting bolt with the belt attached beforehand.

WATER PUMP REPLACEMENT

1. Drain cooling system into a suitable container.
2. Remove timing belt as outlined under Timing Belt, Replace.
3. Remove timing belt rear cover then water pump, Fig. 52.
4. Reverse procedure to install, installing water pump bolts in locations shown in Fig. 54.

Cooling System > < Valve Clearance|Specifications|Page 1890