Conquest L4-2555cc 2.6L SOHC Turbo (1984)
FIGURE 1 - Fuel Mixer Crossover Tube
Reinstall turbo to mixer crossover tube. At this time tighten the coupling band nut to 35 to 43 inch pounds torque (Figure 1).
Install supplied oil feed pipe to oil filter adaptor and turbine assembly. Tighten lower flair nut to 12 to 17 foot pounds torque, but do not tighten
upper flair nut at this time.
Connect catalytic converter to exhaust housing using new gasket from kit. Tighten nuts to 37 to 50 foot pounds torque.
Reinstall the 02 sensor in catalyst housing using new gasket, PN MD041864.
FIGURE 1 - Fuel Mixer Crossover Tube
Install supplied turbo heat shield (Figure 1).