Grand Fury/Salon V8-318 5.2L VIN R (1985)
1-C.
4.
Route and secure the overlay harness, PN 4362295, along the existing headlamp-to-dash main wiring harness to the bulkhead connector
using the existing wiring clips and six tie wraps, PN 6015756, as shown in Figure 1-A. Loop and tape any excess wire of the overlay
harness as illustrated.
5.
Coat the bare blade terminal of the overlay harness liberally with Mopar General Multi-Purpose Grease, PN 4318063, and snap into
cavity #39 (cavity #27 for 1981 model year vehicles only) of the engine side of the bulkhead connector (Figure 1-D).
B.Instrument Panel Harness Pn 4331718