Grand Voyager L4-2.4L DOHC (1996)
Air Door Actuator / Motor: Description and Operation
Zone Door
CIRCUIT OPERATION
The zone door is used on vehicles equipped with the dual zone A/C only The operation of the door is controlled by the HVAC control.
Circuit C62 from the control supplies power to the door motor. The C61 circuit is the ground path back to the control.
The HVAC control also monitors the position of the door through a sensor. Circuit C26 is the 5 Volt feed from the control to the sensor. This
circuit is spliced and supplies voltage to the other sensors.
The C102 circuit is the sensor feedback to the HVAC control.
Circuit C57 is used to supply a common ground path for the sensor hack to the control. This circuit is spliced and provides a ground path for the
other sensors.
