Workshop Manuals Factory service & repair Plymouth
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Plymouth Grand Voyager L4-2.4L VIN B (1997)01 · Relays and Modules
01 · Diagnostics

A/T - Shudder on 1 - 2/2 - 3 Upshift (Control Module, A/T) (page 3 of 3)

Make
Plymouth
Model
Grand Voyager
Engine
L4-2.4L VIN B
Year
1997
Section
21-02-98A › Jun › 98
Relays and ModulesA/T - Shudder on 1 - 2/2 - 3 Upshift · page 3 of 3
A/T - Shudder on 1 - 2/2 - 3 Upshift (Control Module, A/T) (page 3 of 3) – Plymouth Grand Voyager L4-2.4L VIN B (1997)

2.

Use the arrow keys and select # 2 MDS DIAGNOSTICS on the DRB III MAIN MENU Screen.

3.

Use the arrow keys and select DIAGNOSTIC MENU on the MDS, then press NEXT MENU.

4.

Use the arrow keys and select VEHICLE CONTROLLER PROGRAMMING on the MDS, then press NEXT MENU.

5.

Use the arrow keys and select PROGRAMMING OF ALL OTHER CONTROLLERS USING MDS & DRB III on the MDS, then press NEXT
MENU.

6.

Follow the steps presented on the MDS and DRB III(R) which will allow the DRB III(R) to obtain the current part number of the TCM.

7.

The MDS will display the part number of the TCM on the vehicle and the appropriate replacement part number, then press NEXT MENU to begin
programming.

If the TCM on the vehicle has already been updated or programmed, a NO UPDATES AVAILABLE message will be displayed. Check the part
number of the TCM on the vehicle and compare it to the part number displayed. If the TCM has already been updated, then another condition
exists that will require further diagnosis and repair.

8.

The MDS and DRB III(R) will prompt for any operator action needed during the remainder of the programming process.

NOTE:

THE FOLLOWING STEPS ARE REQUIRED BY LAW.

9.

Type the necessary information on the "Authorized Software Update Label" p/n 04669020 (Figure 1). Attach the label to the TCM and cover the
label with the clear plastic overlay.

10.

Type the necessary information on the "Authorized Modification Label" p/n 04275086 and attach the label near the VECI Label (Figure 2).

11.

After the flash update is complete, verify the repair by attempting to duplicate the condition experienced by the customer. If DTC(s) or 1 trip faults
can be set, further diagnosis and repair will be required.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 1997 Plymouth Grand Voyager 2.4L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.