Grand Voyager V6-201 3.3L VIN R SMFI (1997)
Keyless Entry Module: Description and Operation
Remote Keyless Entry Module
CIRCUIT OPERATION
Power for the Remote Keyless Entry (RKE) module is supplied on circuit M1. This circuit is the Ignition Off Draw (IOD) circuit and is protected
by a 10 Amp fuse located in cavity 10 of the Power Distribution Center (PDC). This circuit is HOT at all times.
Ground for the module is supplied on circuit Z2 and terminates at the instrument panel ground.
Circuit G96 is connected between the RKE module and the Body Control Module (BCM). This circuit supplies the BCM with information on the
operators request. The G96 circuit also supplied an input to the memory seat module.
Circuit D9 is connected from the RKE module to the BCM and is used for programming the RKE module.
