Grand Voyager V6-229 3.8L (1996)
Right Quarter Trim Panel - Left On 4 Door
REMOVAL
1. Remove rear header trim cover.
2. Remove liftgate sill plate.
3. Remove second rear seat belt turning loop.
4. Remove bolt holding second rear seat retractor to quarter, if equipped on short wheel base vehicle.
5. Remove jack storage cover.
6. Remove screws holding trim to D-pillar.
7. Disengage hidden clips holding trim to D-pillar.
8. Separate D-pillar trim from vehicle.
INSTALLATION
1. Place D-pillar trim in position on vehicle.
2. Engage hidden clips to hold trim to D-pillar.
3. Install screws to hold trim to D-pillar.
4. Install jack storage cover.
5. Install bolt to hold second rear seat retractor to quarter, if equipped on short wheel base vehicle.
6. Install second rear seat belt turning loop.
7. Install liftgate sill plate.
8. Install rear header trim cover.
Left Quarter Trim Panel-Three Door