Grand Voyager V6-3.0L VIN 3 (1998)
Fig. 4
7.
Remove and discard the two top bolts that mount the ignition coil module, Figure 4.
8.
Replace the discarded ignition coil module mounting bolts with the supplied double-ended studs. Torque studs to 10-15 Nm (85-125 in. lbs.)
Fig. 5
9.
Install the shield over the double-ended studs and attach with two nuts from the shield kit, Figure 5. Torque the nuts to 10-15 Nm (85-125 in. lbs.).
10.
Turn the ignition switch to the Unlock position so the steering wheel can rotate.
11.
Raise vehicle. Then turn the front wheels to the left.