Grand Voyager V6-3.0L VIN 3 (1998)
Inspect the wiper module drain tubes (2), and the lower plenum drain hose to ensure they are fully seated and not restricted, kinked or plugged, see
Figure 1.
PARTS REQUIRED:
AR (1)
05010842AA
Deflector
AR (2)
0153185
Screw
AR (1)
04885330AA
Super Kleen
AR (1)
04318025
Sealant, Silicone
REPAIR PROCEDURE:
This bulletin involves adjusting the hood and/or cowl cover and/or removing any restriction from the wiper module drain tubes (2) and/or lower plenum
drain hose and possibly installing a deflector in the cowl plenum.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-50-02-93 Procedure A
0.5 Hrs.
23-50-02-94 Procedure B
1.2 Hrs.
FAILURE CODE: XX - Service Adjustment
Procedure A