Grand Voyager V6-3.0L VIN 3 (1998)
Wiper Switch: Service and Repair
WARNING: BEFORE SERVICING A STEERING COLUMN EQUIPPED WITH AN AIRBAG REFER TO AIR BAGS AND SEAT BELTS
FOR SAFE SERVICE PROCEDURES.
REMOVAL
1. Release hood latch and open hood.
Turn Signal Multi-Function Switch
2. Disconnect and isolate battery negative cable.
3. Remove upper and lower steering column shrouds.
4. Disconnect wire connector from back of turn signal multi-function switch.
5. Remove screws holding turn signal switch to steering column adapter collar.
6. Remove turn signal switch.
INSTALLATION
-
For Installation, reverse the above procedures. Verify switch operation by placing the control stalk in either the right or left position and turning
the steering wheel to ensure the automatic cancellation of the switch.
