Grand Voyager V6-3.0L VIN 3 (1998)
Steering Knuckle Installation On Outer C/V Joint
6. Slide driveshaft back into front hub. Then install steering knuckle onto the lower control arm ball joint stud.
Lower Ball Joint To Steering Knuckle Attachment
7. Install the steering knuckle to ball joint stud castle nut. Tighten the castle nut to 95 Nm (70 ft. lbs.).
Wheel Speed Sensor Cable Routing Bracket
8. If equipped with antilock brakes, install the speed sensor cable on the steering knuckle and securely tighten bolt.
