Grand Voyager V6-3.0L VIN 3 (1998)
Spring Washer, Nut Lock And Cotter Pin Installation
15. Install the spring washer, hub nut lock, and new cotter pin on end of stub axle. Wrap cotter pin prongs tightly around the hub nut lock.
Wheel Lug Torquing Sequence
16. Install front wheel and tire assembly. Install front wheel lug nuts and tighten in the correct sequence. Tighten lug nuts to 135 Nm (100 ft. lbs.).
17. Lower vehicle.
18. Check for correct fluid level in transaxle assembly. Transaxle for the correct fluid level checking procedure for the type of transaxle being
checked.
19. Set front toe on vehicle to required specification.
