Grand Voyager V6-3.8L VIN L (1999)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement
Front
REMOVE
1. Raise vehicle on jack stands or centered on a frame contact type hoist.
2. Remove the tire and wheel assembly from the vehicle.
Front Speed Sensor Cable Channel Bracket
3. Remove the 2 screws attaching front channel bracket and grommet retainer to the outer frame rail.
CAUTION: When disconnecting the wheel speed sensor from vehicle wiring harness, be careful not to damage pins on connector.
Speed Sensor Cable To Vehicle Wiring Harness
4. Pull speed sensor cable grommet and connector through the hole in the strut tower. Disconnect speed sensor cable from vehicle wiring harness.
