Horizon L4-105 1720cc 1.7L VIN B 2-bbl (1983)
Timing Belt: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove A/C compressor adjusting strap screws and drive belt, if equipped. Remove screws from compressor mount and stabilizer brackets, then
position compressor aside. Remove compressor bracket from alternator and compressor mount bracket.
3.
Loosen alternator adjusting strap and remove drive belt.
4.
Remove alternator mount bolts and position alternator aside.
5.
Remove alternator and compressor mounting bracket from retainer bracket.
6.
Loosen power steering pump drive belt, if equipped.
7.
Raise and support vehicle.
8.
Remove inner fender shield.
9.
Remove air compressor, water pump and air pump drive belts, if equipped.
10.
Remove idler pulley assembly.
Fig. 14 Timing belt & sprocket assembly, exploded view
