Horizon L4-135 2.2L SOHC VIN C (1988)
FRONT DOOR - OUTER BELT WEATHERSTRIP
1. Remove door trim panel and plastic air shield.
2. Align fasteners (17), (18), and (19) with access holes in door inner panel and remove fasteners.
3. Loosen screw from bracket.
4. Lower window until lift channel (5) is accessible through access hole, disengage lift channel from glass studs and lower window to bottom of door.
5. Remove outer belt weatherstrip by disengaging spring clip tabs from door panel slots.
6. Reverse above procedure for installation making sure plastic air shield is cemented to door inner panel.
REAR DOOR - OUTER BELT WEATHERSTRIP
1. Remove door trim panel and plastic air shield.
2. Remove fasteners (19) and lower glass to bottom of door.
3. Remove division bar assembly.
4. Remove weatherstrip by applying an upwards force to disengage retaining spring clips from outer door panel.
5. Reverse above procedure for installation, making sure plastic air shield is cemented to door inner panel.
