plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Six-Step Troubleshooting Procedure|Page 4488 > < Six-Step Troubleshooting Procedure|Page 4486
Page 10
background image

ECU TERMINAL VOLTAGE

Connection condition of the ECU connector)

NOTE:  * Measurement is not possible by using a voltmeter, but is possible by using an oscilloscope.

CHECKING THE LIFTGATE SWITCH CIRCUIT

Disconnect the connector of the ECU and Check at the wiring harness side.

8. Security Light Activation Circuit

DESCRIPTION OF OPERATION

If all doors are in locked state after key locking or key-less locking, the ECU transistor is turned ON and the security light comes on.

Six-Step Troubleshooting Procedure|Page 4488 > < Six-Step Troubleshooting Procedure|Page 4486