Neon L4-2.0L DOHC (1996)
Trim Panel: Service and Repair
A-Pillar Trim
A-Pillar Trim
REMOVAL
1. Remove instrument panel top cover.
2. Disengage clips holding trim to A-pillar.
3. Separate A-pillar trim from vehicle.
INSTALLATION
1. Position A-pillar trim panel to A-pillar.
2. Align locating pins on backside of trim panel to mating holes in A-pillar.
3. Push clips on trim panel into slots in A-pillar.
4. Install instrument panel top cover.
