plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Cable Removal|Page 4340 > < Cable Removal|Page 4338
Page 3
background image

9. Remove scuff plates from right and left rear door sills. Scuff plates are attached to door sills using clips on bottom of scuff plates. Remove by

carefully prying scuff plate retaining clips out of door sills.

10. Fold rear carpeting forward to expose park brake cables.

Compressing Park Brake Cable Retaining Tabs

11. Install the box end of a 1/2 in. wrench over the park brake cable retainer as indicated. This will compress tabs on park brake cable retainer,

allowing cable to be removed from console bracket. From under carpet, grasp park brake cable housing and pull cable straight out of console
bracket.

12. Raise vehicle on jackstands or centered on a frame contact type hoist.
13. Remove rear wheel and tire assembly.

Rear Brake Drum

Cable Removal|Page 4340 > < Cable Removal|Page 4338