Neon L4-2.0L DOHC (1996)
Fig. 9 Passenger Airbag Module
5. Remove the four trim screws which attach the passenger airbag module to the top instrument panel.
6. Remove two module attaching nuts from the support structure.
7. Lift module up until the electrical connector is visible and disconnect the connector from module.
8. For installation, reverse above procedures.
-
Tighten trim screws to 2 Nm (20 in lb) torque.
-
Tighten the module nuts to 22 to 34 Nm (200 to 300 in lb) torque.
