Neon L4-2.0L DOHC (1996)
Sunroof / Moonroof Switch: Description and Operation
CIRCUIT OPERATION
When the operator selects tilt OPEN circuit F1O is connected to circuit Q43. Circuit Q43 connects from the switch to the CLOSED vent limit
switch in the sunroof module.
The voltage is passed through the switch to circuit Q46. The Q46 circuit connects from the limit switch to the slide switch OPEN side.
Power is passed through the switch to the Q41 circuit, then to the power sunroof motor.
Ground is provided on circuit Q42 from the motor to the slide switch CLOSE side. The ground is passed through the bus bar in the switch to
circuit Q45. The Q45 circuit connects from the slide switch to the tilt switch CLOSE side.
Ground is passed through the switch to the Z5 circuit and to ground.
When the operator selects the VENT CLOSE function, power and ground are reversed.
