Neon L4-2.0L DOHC (1996)
Ball Joint: Service and Repair
Lower Ball Joint Replacement
1. Remove lower control arm following procedure outlined under Control Arm/ Control Arm Replacement.
2. Using screwdriver or other suitable tool, pry ball joint seal boot off ball joint assembly.
3. Position receiving cup tool No. 6758, or equivalent, to support lower control arm while receiving ball joint assembly.
4. Install receiver/installer tool No. 6804, or equivalent, in top of ball joint assembly.
5. Using suitable press, press ball joint assembly completely out of control arm.
6. Reverse procedure to install.
