plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Steering/Suspension - Alignment Specifications Revisions|Page 1495 > < Steering/Suspension - Alignment Specifications Revisions|Page 1493
Page 3
background image

2

05016581AA

Bushing, Front Lower Control Arm Rear Isolator

REPAIR PROCEDURE:

1.

Remove and replace the front lower control arm rear isolator bushing following the procedure in the appropriate Neon Service Manual, Section 2,
Suspension.

2.

Set the wheel alignment using the procedures and the specifications found in the appropriate Neon Service Manual, Section 2, Suspension.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:

02-10-06-90

2.9 Hrs.

FAILURE CODE: P8 - New Part

Technical Service Bulletin # 02-09-99

Date: 990702

Steering/Suspension - Smooth Road Vibration

NUMBER: 02-09-99

GROUP: Suspension

DATE: July 2, 1999

SUBJECT:
Smooth Road Steering Wheel Vibration

OVERVIEW:
This bulletin involves inspecting and correcting front suspension components and replacing the front suspension lower control arm rear bushing as
needed.

MODELS:

1995-1999 (PL) Neon

SYMPTOM/CONDITION:

A smooth road steering wheel back and forth oscillation/vibration may be observed when driving at around 72 MPH.

DIAGNOSIS:

Steering/Suspension - Alignment Specifications Revisions|Page 1495 > < Steering/Suspension - Alignment Specifications Revisions|Page 1493