Plymouth Workshop Manuals
PB 150 V8-318 5.2L VIN T 2-BBL (1983)
Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Installation > Page 2533
Brake Caliper: Service and Repair
Fig 3 Adaptor And Caliper Machined "Ways" And Caliper Retention
1. Raise vehicle, remove wheel and tire assemblies.
Fig 6 Removing Or Installing Caliper
3. Carefully slide caliper out and away from disc and adaptor.
a. Carefully depress brake pedal to hydraulically push piston out of bore (brake pedal will fall away when piston has passed bore opening)
removed, disconnect flexible brake line at frame bracket after removing first piston. Plug brake tube to remove piston from opposite caliper.)
CAUTION: Under no condition should air pressure be used to remove piston from bore. Personal injury could result from such practice.
6. Disconnect brake flexible hose from the caliper.
|[PREV PAGE] [NEXT PAGE]|