Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Brakes and Traction Control > Drum Brake System > Wheel Cylinder > Component Information > Service and Repair > Wheel Cylinder Removal > Page 2606

Page 1
background image

Wheel Cylinder: Service and Repair
Cleaning and Inspection

Fig 2  Rear Wheel Cylinder 11 And 12 Inch Brakes

1. With brake drums removed, inspect the wheel cylinder boots for evidence of a brake fluid leak. 
2. Block brake pedal in stroke position.
3. Visually check the boots for cuts, tears, or heat cracks.

-

If any of these conditions exist, the wheel cylinders should be completely cleaned, inspected and new parts installed.

NOTE:  A slight amount of fluid on the boot may not be a leak, but may be preservative fluid used at assembly.

Brakes and Traction Control > Drum Brake System > Wheel Cylinder > Component Information > Service and Repair > Wheel Cylinder Removal > Page 2606

[PREV PAGE] [NEXT PAGE]