Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Testing and Inspection > With Caliper On Vehicle

Page 1
background image

Brake Caliper: Testing and Inspection
With Caliper On Vehicle

Fig 9  Caliper Assembly

Check for piston seal leaks (evident by brake fluid in and around boot area and inboard lining) and for any ruptures of piston dust boot. 
-

If boot is damaged, or fluid is evident, it will be necessary to disassemble caliper assembly and install a new seal, boot, (and piston if damaged
or corroded). 

Check the mating surfaces of the abutments on the caliper and adaptor.
-

If corroded or rusty, clean surfaces with wire brush. Inspect braking surfaces of disc.

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Testing and Inspection > With Caliper On Vehicle

[PREV PAGE] [NEXT PAGE]