Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Brakes and Traction Control > Parking Brake System > Parking Brake Cable > Component Information > Testing and Inspection > Page 2685

Page 1
background image

Parking Brake Cable: Adjustments

1. Release parking brake lever and loosen cable adjusting nut to be sure cable is slack.
2. With rear wheel brakes properly adjusted tighten cable adjusting nut until a slight drag is felt when the rear wheels are rotated. Then loosen the

cable adjusting nut until both rear wheels can be rotated freely.

3. To complete the operation, back off an additional two turns of the cable adjusting nut.
4. Apply and release parking brake several times to be sure rear wheels are not dragging when cable is in released position.

Brakes and Traction Control > Parking Brake System > Parking Brake Cable > Component Information > Testing and Inspection > Page 2685

[PREV PAGE] [NEXT PAGE]