Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Instrument Panel, Gauges and Warning Indicators > Fuel Gauge Sender > Component Information > Technical Service Bulletins > Customer Interest for Fuel Gauge Sender: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 3327

Page 8
background image

INSTRUMENT PANEL WIRING

7.

With Auxiliary Air Conditioning and/or Heater Without Power Windows - Relay Harness PN 4362290

a.

Remove instrument panel hood and bezel assembly. Remove radio.

b.

Install the ignition switch protection relay, PN 4162597, to the back of the brake bracket (mounting location shown in Figure 2-B) and
attach instrument panel relay harness, PN 4362290, to relay.

c.

Secure bare eyelet ground terminal (white wire) from instrument panel relay harness, PN 4362290, with screw, PN 9414722, to the
back of the brake bracket (Figure 2-B).

FIGURE 2D - INSTRUMENT PANEL WIRING

d.

Route the dark blue wire from the instrument panel relay harness, PN 4362290 to the existing 3-way red molded connector using
existing wiring clips. Insert bullet terminal (dark blue wire) into red molded connector (Figure 2-D).

Instrument Panel, Gauges and Warning Indicators > Fuel Gauge Sender > Component Information > Technical Service Bulletins > Customer Interest for Fuel Gauge Sender: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 3327

[PREV PAGE] [NEXT PAGE]