Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Instrument Panel, Gauges and Warning Indicators > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Fuel Gauge Sender: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 3485

Page 6
background image

FIGURE 2D - INSTRUMENT PANEL WIRING

FIGURE 2F - INSTRUMENT PANEL WIRING

6.

Route the orange colored 1-way connector from the instrument panel overlay harness, PN 4362289, to the back of the brake bracket for
mating in a later step (Figures 2-B, 2-D, and 2-F).

Secure instrument panel overlay harness, PN 4362289, using tie wrap, PN 6015756, to keep it clear of any possible interferences.

Only one of the following installation procedures (Step 7) will be used. Take notice of which one applies to the vehicle being repaired.

7.

Without Auxiliary Air Conditioning and/or Heater - Jumper Harness PN 4362291

a.

Remove instrument panel hood and bezel assembly and remove radio.

Instrument Panel, Gauges and Warning Indicators > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Fuel Gauge Sender: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 3485

[PREV PAGE] [NEXT PAGE]