Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Instrument Panel, Gauges and Warning Indicators > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Fuel Gauge Sender: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 3500

Page 21
background image

FIGURE 4B - Mounting Fuel Resevoir/Filter

2.

Install supplied fuel reservoir/filter, PN 4418012, using two (2) self-tapping screws, PN 6022777 (Figure 4-B). Screws must be tightened to
95 +/- 10 inch pounds.

NOTE:

RUBBER SPLASH SHIELD MAY HAVE TO BE CUT OUT AROUND FUEL RESERVOIR.

3.

Remove and discard the fuel pump outlet tube, return hose, and fuel filter with rubber hoses and clamps. Install the fuel pump-to-reservoir
tube, PN 4306968 (Figure 4-B).

4.

Install return hose assembly, PN 4418006, from the fuel reservoir return nipple to the chassis tube, and clamp with PN 6500650 at each end
(Figure 4-B).

5.

Slide both 6" pieces of convolute sleeve, PN 4279993, over each 5/16" x 8" hose, PN 42O3576.

Instrument Panel, Gauges and Warning Indicators > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Fuel Gauge Sender: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 3500

[PREV PAGE] [NEXT PAGE]