Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Powertrain Control Module <--> [Engine Control Module] > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Powertrain Control Module: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 1506

Page 7
background image

FIGURE 2D - INSTRUMENT PANEL WIRING

b.

Route instrument panel jumper harness, PN 4362291, from the back of the brake bracket to the existing 3-way red molded connector.
Secure by using existing wiring clips (Figure 2-D).

c.

Insert the bare bullet terminal (black with white tracer wire) from instrument panel jumper harness, PN 4362291, into the existing
3-way red molded connector from the main instrument panel wiring harness (Figure 2-D).

d.

Mate the orange colored 1-way connector from instrument panel jumper harness, PN 4362291, to the orange colored 1-way connector
from the instrument panel overlay harness, PN 4362289 (Figure 2-D).

e.

Reinstall instrument panel hood and bezel assembly and install radio.

FIGURE 2F - INSTRUMENT PANEL WIRING

7.

With Auxiliary Air Conditioning and/or Heater and Power Windows - Jumper Harness PN 4362292

a.

Disconnect from each other, the two existing brown colored 1-way connectors located near the left instrument panel vent (Figure 2-F).

Reconnect these two brown colored 1-way connectors to the two brown colored 1-way connectors from instrument panel jumper
harness, PN 4362292 (Figure 2-F).

b.

Mate the orange colored 1-way connector from the instrument panel jumper harness, PN 4362292, to the orange colored 1-way
connector from instrument panel overlay harness, PN 4362289 (Figure 2-F).

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Powertrain Control Module <--> [Engine Control Module] > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Powertrain Control Module: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 1506

[PREV PAGE] [NEXT PAGE]