Plymouth Workshop Manuals
PB 150 V8-318 5.2L VIN T 2-BBL (1983)
Powertrain Management > Fuel Delivery and Air Induction > Fuel Pressure Regulator > Component Information > Technical Service Bulletins > Customer Interest for Fuel Pressure Regulator: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 1932
Refer to parts list for contents of each package.
Must be ordered separately:
Authorized Modification Label
IT IS IMPORTANT THAT THE SPECIFIED FUEL TANK SIZE
A.Engine Compartment Harness Pn 4362295
Disconnect the battery.
Remove engine side of bulkhead connector. Depress fingers on instrument panel half of bulkhead connector, and push connector back
FIGURE 1A - ENGINE COMPARTMENT WIRING
Remove engine cover. Install the bare eyelet terminal of overlay harness, PN 4362295, to the negative terminal of the ignition coil as shown
FIGURE 1B - ENGINE COMPARTMENT WIRING
|[PREV PAGE] [NEXT PAGE]|