Plymouth Workshop Manuals
PB 150 V8-318 5.2L VIN T 2-BBL (1983)
Powertrain Management > Fuel Delivery and Air Induction > Fuel Pressure Regulator > Component Information > Technical Service Bulletins > Customer Interest for Fuel Pressure Regulator: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 1952
FIGURE 4B - Mounting Fuel Resevoir/Filter
Install one 5/16" x 8" hose, PN 4203576 (with convolute sleeve PN 4279993), from the fuel pump outlet tube to the reservoir/filter inlet
Install the other 5/16" x 8" hose, PN 4203576 (with convolute sleeve PN 4279993), from the reservoir outlet nipple to the carburetor fuel
IF EQUIPPED WITH THERMOQUAD CARBURETOR, DO NOT INSTALL HOSE TO CARBURETOR TUBE SINCE
Tighten all hose clamps to 10 inch pounds.
Type Authorized Modification Label, PN 4275086, as shown in Figure 10 and attach near VECI label.
For all models except 1981-1984 equipped with Carter Thermoquad 4BBL carburetor or dual air conditioning units without electrically
|[PREV PAGE] [NEXT PAGE]|